+7 (473) 290-00-99
+7 (473) 290-00-99
+1 (972) 904-12-86

The antenna is designed to work in networks LTE1800 3G(UMTS2100), WiFi2400, LTE2600 at frequencies from 1700 MHz to 2700 MHz.

  • Provides confident long-distance reception of 3G, LTE and WiFi Internet.
  • Suitable for all operators.


The antenna design consists of:

  • MIMO Feed
  • Wire parabolic direct-focal reflector.
  • Mounts of the antenna feed and mounts to the reflector.


The reflector is painted with powder polymer paint. All unpainted parts are zinc galvanic coating. This ensures long-term operational stability and reliability in operation.

With the help of this antenna it is possible to ensure reliable communication with the base station at a distance of up to 20 km in terms of direct visibility.
The antenna has low wind resistance (low wind load), which allows it to be installed on a high mast, without fear of buildup in a strong wind.

The Assembly should start with the antenna reflector.

To assemble the tool required: wrench 8x10, screwdriver slotted and cross, tape measure.

  • On the reflector install legs of the holder of the converter
  • Fix them with short screws from the reflector mounting kit
  • Important! Before further assembly is necessary to find out in what polarization the antenna will be installed! It depends on how the attachment will be oriented relative to the reflector.
  • set the bracket angle on the reflector.
  • Pass the cable reduction (sold separately) through the square hole in the reflector, then pass the cable through the square tube of the antenna feed from the mounting holes.
  • Twist the connector of the cable drop on the feed and until we stop we put square tube on the feed.
Dimensions (length , width , height ), mm
130  x   610  x   560 

Antenna characteristics:

Operating frequency range, MHz
1700-2700
Antenna gain, dB
21
VSWR in the operating frequency range, not more than
1.5
Polarization
Linear
Input impedance, Ohm
50
Maximum input power, W
100
Connector
SMA-male
Permissible wind load, m/s
25
Operating temperature range, °C
-40 … +50
Maximum permissible humidity, %
100
Port isolation, not less, dB
20
Communication standard
3G (UMTS2100)
4G(LTE2600), YOTA
LTE 1800
WiFi 2400
Multiband
Type of mounting
on the tube
Execution type
parabolic
MIMO
directed

Equipment:

Position
Parabolic reflector
Antenna feed
Mounting kit