Coaxial cable SAT 703, hank 100 meters
Print
For antennas 3G, 4G, LTE. Low attenuation to 3GHz.
Cable RG-6U SAT-703(75 Ohm) is one of the most qualitative and effective solutions to transfer data at frequencies up to 3000 MHz. This cable consists of central copper conductor and dual screen.
The center conductor is solid copper. Braid made of tinned copper, and a screen made of durable aluminum foil. Cable RG-6U SAT-703 resistant to moisture, increased UV, and abrupt temperature spikes. The nominal characteristic impedance of RG-6U 96 is 75 Ohm. The outer shell is made of PVC.
| Frequency(MHz) | Attenuation dB/m |
|---|---|
| 800 | 0,17 |
| 1000 | 0,175 |
| 1700 | 0,23 |
| 2050 | 0,26 |
| 2400 | 0,29 |
| 3000 | 0,312 |
| 3500 | 0,386 |
Measurements were made on signal power of 10 dBm. Due to the low attenuation at frequencies from 800 MHz to 3 GHz, despite the resistance 75 Ohm we recommend to use this cable to connect antenna 3G or 4G antenna for modem.
A comparison of the attenuation of the cables 50 Ohm and 75 Ohm you can watch our review.
|
Dimensions (length , width , height ), mm
|
400
x
400
x
150
|
Cables - characteristics:
|
Wave resistance
|
75
|
|
Diameter of center conductor, mm
|
1,02
|
|
Center conductor material
|
copper
|
|
Diameter of dielectric, mm
|
4,8
|
|
Dielectric material
|
foamed polietilen
|
|
Diameter of braid, mm
|
5,3
|
|
Braid material
|
foil, tinned copper wire
|
|
Diameter of external insulator, mm
|
6,8
|
|
Eexternal Insulator Material
|
polietilen
|
|
Capacity, pF / meter
|
52
|
|
Operating temperature range
|
-40/+85 °C
|
|
Cable type
|
SAT-703
|
|
Cable sort
|
Coaxial
|