Coaxial semi-rigid cable RG405 CF086-50

High quality semi-rigid microwave RF coaxial cable with PTFE dielectric and outer screen braid of tinned copper wires. Teflon dielectric allows to use the cable in a wide range of temperatures. The inner conductor consists of a solid silver copper wire. This cable is recommended for use in particularly demanding cases that require high-precision signal transmission in combination with high flexibility. Flexible cable is simple and is done without the use of special equipment. Allows for greater power.

The main characteristics of the coaxial cable CF086-50

• Impedance: 50±2 Ohm
• Linear capacity: 95 pF/m
• Velocity factor: 1,43
• The diameter of center conductor: 0.51 mm
• Conductor material: silver copper
• The diameter of dielectric: 1,63 mm
• Material dielectric: PTFE - Polytetrafluorethylene
• The diameter of the outer braid: 2,18 mm
• Braid material: tinned copper
• Operating temperature range: -45° to +100° C

The electrical characteristics of the cable CF086-50

• Boundary frequency: 63 GHz
• Maximum operating frequency: 40 GHz
• Velocity factor: 1.43
• Relative dielectric constant: 2.07
• Impedance: 50±2 Ohms
• Nominal linear capacitance: 95 pF/m
• Nominal inductance per unit length: 0.23 µh/m
• The resistance of the Central conductor DC: 210.6 Ohm/km
• Resistance braid DC: 33.5 Ohm/km
• Insulation resistance: 1000 MOhm*km
• The insulation test voltage of 50 Hz frequency ( min): 5000
• The shielding efficiency (max): 100 dB
• Breakdown voltage shell: 3000 W

The mechanical characteristics of the cable CF086-50

• Minimum bending radius (once): 6.5 mm
• Minimum bending radius (multiple times): 25 mm
• Weight: 17 kg/km

Table attenuation for coaxial cable CF-086-50