+7 (473) 290-00-99
+7 (473) 290-00-99
+1 (972) 904-12-86

Antenna KAA18–5850 used Wi-Fi standard IEEE 802.11n. Standard 802.11n increases the data transfer rate is almost 4 times compared to 802.11g and reaches speeds of 300 Mbit/s. Standard 802.11n is based on MIMO technology (Multiple Input Multiple Output — data transmission technology using N antennas and M receiving antennas).

Antenna KAA18–5850 is an antenna array with weakly correlated elements, which is achieved through the use of technology of polarization diversity signals. When using the antenna KAA18–5850 802.11n can achieve both increase the speed of information transmission, and improve reliability of wireless data transmission.

Antenna KAA18–5850 consists of two elements, the polarization separation of 90°. Each antenna element is operated as reception and signal transmission.

Antenna KAA18–5850 made in a sealed enclosure, resistant to weather conditions and can be used both inside and outdoors. The antenna is designed for installation on the mast or on the wall with wall bracket KH-200.

Read the article "How to choose a WiFi antenna".

Dimensions (length , width , height ), mm
400  x   220  x   130 

Antenna characteristics:

Operating frequency range, MHz
5500-6000
Antenna gain, dB
18
VSWR in the operating frequency range, not more than
1.6
Polarization
Linear
Input impedance, Ohm
50
Maximum input power, W
10
Connector
N- female
Permissible wind load, m/s
30
Operating temperature range, °C
-40 … +50
Maximum permissible humidity, %
100
Port isolation, not less, dB
38
Communication standard
WiFi 5800
Type of mounting
on the tube
Execution type
directed
MIMO

Equipment:

Position
Antenna
Bracket
Pipe clamp
Manual
Package