Directional Wi-Fi/MIMO antenna 6.2 GHz KAA18-6150, 18 dB
Print
Antenna standard IEEE 802.11n. Transfer rate up to 300 Mbit/s.
Antenna KAA18–6150 is used in the Wi-Fi networks standard IEEE 802.11n. Standard 802.11n increases the data transfer rate is almost 4 times compared to 802.11g and reaches speed of 300 Mbit/s. Standard 802.11n is based on MIMO technology (Multiple Input Multiple Output — data transmission technology using N antennas and M receiving antennas).
Antenna KAA18–6150 is an antenna array with weakly correlated elements, which is achieved through the use of technology of polarization diversity signals. When using the antenna KAA18–6150 802.11n can achieve both increase the speed of information transmission, and improve reliability of wireless data transmission.
Antenna KAA18–6150 consists of two elements, the polarization separation of 90°. Each antenna element is operated as reception and signal transmission.
Antenna KAA18–6150 made in a sealed enclosure, resistant to weather conditions and can be used both inside and outdoors. The antenna is designed for installation on the mast or on the wall with wall bracket KH-200.
Read the article "How to choose a WiFi antenna".
|
Dimensions (length , width , height ), mm
|
430
x
200
x
120
|
Antenna characteristics:
|
Operating frequency range, MHz
|
5900-6400
|
|
Antenna gain, dB
|
18
|
|
VSWR in the operating frequency range, not more than
|
1.6
|
|
Polarization
|
Linear
|
|
Input impedance, Ohm
|
50
|
|
Maximum input power, W
|
10
|
|
Connector
|
N- female
|
|
Permissible wind load, m/s
|
30
|
|
Operating temperature range, °C
|
-40 … +50
|
|
Maximum permissible humidity, %
|
100
|
|
Port isolation, not less, dB
|
38
|
|
Communication standard
|
WiFi 6200
|
|
Type of mounting
|
on the tube
|
|
Execution type
|
Panel
|
Equipment:
|
Position
|
Кронштейн угловой
|
|
Антенна KROKS KAA18-6150
|
||
|
Хомут с комплектом метизов для крепления на мачту
|
||
|
Руководство по эксплуатации (паспорт)
|
||
|
Упаковка
|
||