Parabolic MIMO antenna KNA27-800/2700P, 27 dB
Print
MIMO antenna, with the gain of 27 dB,
for routers and modems.
Designed to work in networks:
LTE (800, 1800, 2100, 2300, 2600),
UMTS (900, 2100), Wi-Fi 2400
Frequency range: 800-2700 MHz.
The reflector consists of 4 parts.
KROKS KNA27-800/2700P - is a parabolic broadband directional MIMO antenna with a gain of 27 dB. The antenna supports LTE advanced technology and is designed to work with LTE modems cat.6, cat.9, cat.12 with the possibility of frequency aggregation, routers and other equipment operating in the frequency range of 800-2700 MHz.
The antenna works in wireless communication networks with equipment standards:
-
4G - LTE 800, 1800, 2100, 2300, 2600
-
3G - UMTS 900, 2100
-
Wi-Fi 2400
The antenna design allows you to transmit data over a considerable distance (up to 40 km) in conditions of direct optical visibility. The mounting of the irradiator allows you to change the polarization by turning it without unscrewing it from the antenna.
The antenna has a low wind resistance (low wind load) so you can install it on a high mast, without fear of rocking in a strong wind.
As a rule, solutions about parabolic antennas are used in conditions of a very poor input signal. It allows you to establish a reliable connection even in those cases, when other types of antennas are powerless. Compared to panel antennas and wave channels, parabolic antennas provide significantly higher gain.
The antenna irradiator is equipped with two RG-58 cables with SMA(male), N(female), F(female) connectors at the customer's choice. To connect the antenna to the hermobox, for example to KG-SMAx2, we recommend to choosе SMA(male) connectors (indicated above the price at the order).
Advantages of the KNA 27-800/2700P antenna:
- wide operating frequency range 800-2700 MHz
-
gain 27 dB
-
the ability to change the polarization without removing the irradiator
-
operating range up to 40 km in direct line of sight
-
light weight
-
assembly design
-
no swinging in the wind
The antenna consists of:
- MIMO irradiator
- A wire parabolic straight-focus reflector.
- The mounts of the irradiator and the mounts of the reflector.
The reflector is painted with zinc primer and powder polymer paint. All unpainted parts are zinc galvanic coating. This ensures long-term operational stability and reliability.
|
Dimensions (length , width , height ), mm
|
1 060
x
1 060
x
142
|
Antenna characteristics:
|
Operating frequency range, MHz
|
800-2700
|
|
Antenna gain, dB
|
27
|
|
VSWR in the operating frequency range, not more than
|
2
|
|
Polarization
|
Linear
|
|
Input impedance, Ohm
|
50
|
|
Maximum input power, W
|
10
|
|
Connector
|
SMA-male
|
|
F- female
|
||
|
N- female
|
||
|
Permissible wind load, m/s
|
25
|
|
Operating temperature range, °C
|
-40 … +50
|
|
Maximum permissible humidity, %
|
100
|
|
Port isolation, not less, dB
|
20
|
|
Communication standard
|
LTE 2600
|
|
LTE 1800
|
||
|
LTE 800
|
||
|
UMTS 2100
|
||
|
UMTS 900
|
||
|
GSM 1800
|
||
|
GSM 900
|
||
|
WiFi 2400
|
||
|
Multiband
|
||
|
Type of mounting
|
on the tube
|
|
Execution type
|
Parabolic
|
Equipment:
|
Position
|
Assembly parabolic reflector 27 dB
|
|
MIMO 800-2700 MHz irradiator
|
||
|
Mounting kit
|
||
|
User manual
|
||
|
Pakaging
|
||