Broadband 2G/3G/4G MIMO antenna KAA18-1700/2700, 18 dB
Print
Broadband MIMO antenna for 2G/3G/4G/WIFI. The amplification - 18 dB.
Supports standards LTE1800, UMTS2100, WiFi2400, LTE2600.
It is recommended to use complete with 3G/4G modems and routers.
Товар добавлен в корзину
Panel antenna KAA18-1700/2700 is designed for use with 3G, 4G, YOTA modems, GSM/3G repeaters in the range of 1700-2700 MHz.
The antenna is compatible with the equipment to the following standards:
- 2G(EDGE, GPRS frequencies GSM1800)
- 3G (UMTS 2100)
- 4G (LTE1800, LTE2600)
- 2.4 GHz WI-FI (IEEE 802.11 b, g, n)
A wide range of operating frequencies of the antenna enables 3G/4G modems to work effectively at the boundaries of the 4G service areas. The modem will automatically switch to the 3G standard, in the absence of a 4G signal, and the antenna will provide a high-quality signal in both bands.
The body of the antenna is made of ABS plastic resistant to UV radiation and precipitation. The antenna input has short circuit DC current between the outer and inner conductors, which reduces the probability of accumulation of static electricity at the input of active equipment, reducing the probability of failure from static electricity, and makes it unnecessary to use a lightning arrester. Antenna mount designed for installation on a vertical pipe with a diameter of 32-40 mm. and allows you to adjust the angle of inclination.
|
Dimensions (length , width , height ), mm
|
485
x
265
x
80
|
Antenna characteristics:
|
Operating frequency range, MHz
|
1700-2700
|
|
Antenna gain, dB
|
15-18
|
|
VSWR in the operating frequency range, not more than
|
1.8
|
|
Polarization
|
Linear
|
|
Input impedance, Ohm
|
50
|
|
Maximum input power, W
|
10
|
|
Connector
|
N- female
|
|
F- female
|
||
|
Permissible wind load, m/s
|
30
|
|
Operating temperature range, °C
|
-40 ... +80
|
|
Maximum permissible humidity, %
|
100
|
|
Port isolation, not less, dB
|
35
|
|
Communication standard
|
WiFi 2400
|
|
GSM 1800
|
||
|
LTE 1800
|
||
|
Multiband
|
||
|
LTE 2600
|
||
|
UMTS 2100
|
||
|
Type of mounting
|
on the tube
|
|
Execution type
|
Panel
|
Equipment:
|
Position
|
Antenna
|
|
Clamp with hardware for mounting on a mast
|
||
|
Angle bracket
|
||
|
Package
|
||
|
User manual
|
||