+7 (473) 290-00-99
+7 (473) 290-00-99

Panel antenna KAA18-1700/2700 is designed for use with 3G, 4G modems, in the frequency range of 1700-2700 MHz.

The antenna is compatible with the equipment to the following standards:

  • 2G(EDGE, GPRS frequencies GSM1800)
  • 3G (UMTS 2100)
  • 4G (LTE1800, LTE2600)
  • 2.4 GHz WI-FI (IEEE 802.11 b, g, n)

A wide range of operating frequencies of the antenna enables 3G/4G modems to work effectively at the boundaries of the 4G service areas. The modem will automatically switch to the 3G standard, in the absence of a 4G signal, and the antenna will provide a high-quality signal in both bands.

The body of the antenna is made of ABS plastic, resistant to UV radiation and precipitation. The antenna input has short circuit DC current between the outer and inner conductors, which reduces the probability of accumulation of static electricity at the input of active equipment, reducing the probability of failure from static electricity, and makes unnecessary to use a lightning arrester. Antenna mount designed for installation on a vertical pipe with a diameter of 32-40 mm. and allows you to adjust the angle of inclination.

Dimensions (length , width , height ), mm
480  x   260  x   140 

Antenna characteristics:

Operating frequency range, MHz
1700-2700
Antenna gain, dB
15-18
VSWR in the operating frequency range, not more than
1.8
Polarization
Linear
Input impedance, Ohm
50
Maximum input power, W
10
Connector
SMA-female
Permissible wind load, m/s
30
Operating temperature range, °C
-40 … +50
Maximum permissible humidity, %
100
Port isolation, not less, dB
35
Communication standard
WiFi 2400
GSM 1800
LTE 1800
Multiband
LTE 2600
UMTS 2100
Type of mounting
on the tube
Execution type
With thermobox
Panel

Equipment:

Position
Пигтейл - 2 шт.
Антенна с гермобоксом
Руководство по эксплуатации
Хомут с метизами для крепления на мачту
Упаковка
Кронштейн угловой
    Recommend to read
    18 sep , 2019 2 224
    Как навести 3G/4G антенну на базовую станцию с помощью модема HUAWEI E3372h

    В статье вы узнаете, как навести антенну на базовую станцию самостоятельно, без привлечения специалистов и специального оборудования.