+7 (473) 290-00-99
+7 (473) 290-00-99

The antenna is designed to work in networks LTE1800, 3G (UMTS2100), WiFi2400, LTE2600 at frequencies from 1800 MHz to 2700 MHz.

  • Provides confident long-distance reception of 3G, LTE and WiFi Internet.
  • Suitable for work with all operators.

The antenna design consists of:

  • Irradiator
  • Wire parabolic direct-focal reflector.
  • Mounts of the radiator and mounts to the reflector.

The reflector is painted with polymer powder paint. All unpainted parts are zinc plated. This ensures long - term operational stability and reliability.

With this antenna, you can provide reliable communication with the base station at a distance of 20 km in line of sight. The antenna has a low wind resistance (low wind load), which allows you to install it on a high mast without fear of swinging on a strong wind.

Assembly should start with the antenna reflector.

The assembly will require a tool: a 8x10 wrench, a slotted and cross-head screwdriver, a tape measure.

  • Converter holder feet set on the reflector,
  • Fix them with short screws from the reflector mounting kit
  • Important! Before further assembly it is necessary to find out in what polarization the antenna will be installed ! It depends on how the attachment will be oriented relative to the reflector.
  • install the angle bracket on the reflector.
  • Pass the cable reduction (sold separately) through the square hole in the reflector, then pass the cable through the square tube of the irradiator from the mounting holes.
  • Screw the connector of the reduction cable on the irradiator and put the square tube on the irradiator until it stops.
Dimensions (length , width , height ), mm
130  x   610  x   560 

Antenna characteristics:

Operating frequency range, MHz
Antenna gain, dB
VSWR in the operating frequency range, not more than
Input impedance, Ohm
Maximum input power, W
N- female
Permissible wind load, m/s
Operating temperature range, °C
-40 … +50
Maximum permissible humidity, %
Communication standard
WiFi 2400
LTE 1800
LTE 2600
GSM 1800
UMTS 2100
Type of mounting
on the tube
Execution type


Руководство по эксплуатации (паспорт)
Комплект крепежа
Облучатель 1700-2700 МГц
Параболический сетчатый рефлектор
    Recommend to read
    21 feb , 2014 241
    Что такое усиление антенны простыми словами

    В статье изложены основные свойства радиоволн. На простых и доступных примерах рассматривается коэффициент усиления антенны и его зависимость от частоты. Поляризация радиоволн.

    18 sep , 2019 565
    Как навести 3G/4G антенну на базовую станцию с помощью модема HUAWEI E3372h

    В статье вы узнаете, как навести антенну на базовую станцию самостоятельно, без привлечения специалистов и специального оборудования.

    24 dec , 2014 217
    Как установить репитер GSM. Пособие.

    Описание установки и настройки репитера для тех, кто профессионально занимается установкой.