Parabolic antenna KN27-1700/2700, 27 dB

The antenna is designed to work in networks LTE1800 3G(UMTS2100), WiFi2400, LTE2600 at frequencies from 1700 MHz to 2700 MHz.

• Confident the far provides 3G, LTE and Wi-Fi Internet.
• Suitable for all operators.

The antenna design consists of:

• Feed
• Wire parabolic direct-focal reflector.
• Mounts of the feed and mounts of the reflector.

The reflector is painted with powder polymer paint. All unpainted parts are zinc galvanic coating. This ensures long-term operational stability and reliability.

With the help of this antenna you can ensure reliable communication with the base station at a distance of up to 25 km in terms of direct visibility.
The antenna has a low wind resistance (low wind load) that allows you to install it on a high mast, without fear of buildup in a strong wind.

The assembly should start with the antenna reflector.

For assembly required tool: wrench 8x10. screwdriver slotted and cross, tape measure.

• Install the converter holder tabs on the reflector.
• Fix them with short screws from the reflector mounting kit
• Important! Before further assembly is necessary to find out what the polarization will be set antenna! It depends on how the fixtures are oriented relative to the reflector.
• Install the angle bracket on the reflector.
• Pass the cable reduction (sold separately) through the square hole in the reflector, then pass the cable through the square tube of the feed from the mounting holes.
• Twist the connector of the cable drop on the feed and until we stop we put a square tube on the feed.