+7 (473) 290-00-99
+7 (473) 290-00-99
+1 (972) 904-12-86

The device allows:

  • to conduct a Ping test to a local network, the Internet
  • automatically identify and assign IP address (DHCP client)
  • to change the package data: number of packets, packet length, time out, TTL
  • to determine the presence of "power-over-ethernet" (POE)
  • to perform the test: open, short circuit, interference from neighboring wires for the reverse connection and the location of the cliff using the methods of "M-S" and "M-R"
  • to check the interference of neighboring wires when looking possible the problem of low data transmission speeds
  • to quickly find the problem wire in a bundle of other wires without removing the insulation
  • measure length of network cable, coaxial cable, telephone wire and wires of standard USB with a length of up to 2000 meters without connecting the sensor.
  • to trace a cable on a running switch or router, without making a noise in the signal.
  • to accurately determine the place of short circuit or breakage;

Useful features of the device:

  • Notification low battery
  • Remote transmitter with tone signal for "continuity" of the wires
  • Function save the results to device memory
  • Data transfer: import and export of data (160 sets)
  • The highlighting feature of the banknotes ("currency detector") and a flashlight to work in the dark
  • Auto power-off "downtime" and selecting the language: Chinese or English
  • A microprocessor with a built-in system self-test ensures reliable operation of the whole complex

Specifications:

Dimensions

Tester: 173 x 92 x 35 mm;

Receiver 183 x 58 x 35mm;

The sensor 106 x 32 x 30mm.

Display:

LCD screen with a diagonal 2.8’ resolution 320x240 pixels (effective image size 60 x 45 mm)

Power source:

Lithium battery 3.7 V, 1800 mAh

Types of trace in the trace cables:

twisted pair STP/UTP 5E, 6E, telephone cable, coaxial cable and various metal wires connected with alligator clips

Types of cables, check for a fault:

twisted pair STP/UTP 5E, 6E, telephone cable, coaxial cable and various metal wires connected with alligator clips

Operating temperature and environment humidity:

-10ºC ~ +60ºC / 20% ~ 70%

Interfaces testing devices:

main tester: RJ-45 (M), RJ45(S), RJ11, BNC connector; remote sensor: RJ45 connectors, RJ11, BNC connector;

Length measurement:

The lengths range: 1-2000m;

calibration accuracy: 2 (+/-0.5 m) (when calibrating cable > 10m);

accuracy: 3% ((+/-0.5 m);

when standards of performance of AMP cables, CAT 5E, 6E);

possible units on the display: meter, foot, yard.

Length calibration, storage and data load:

The operator can set the length in the selected unit of measurement, save this value in the system and to use the measurements (the amount of memory available allows you to upload up to 9 data sets). The length of calibrating cable sample shall not be less than 10

meters.

The definition of the layout of the wires in the cable:

Determination of open circuit, short circuit, reverse bridging, whipping, interference, etc.

Test lines:

the presence of POE, PING.

Trace (search) cable:

Search problem of the cable, among many other wires

Setting interface language and auto-disconnect:

The operator can switch the English and Chinese language;

the operator can set the time for automatic shutdown of the tester.

Package includes:

  • Tester transmitter 1 pc.
  • Receiver 1 EA.
  • Remote sensor 8 pcs.
  • The contact clamp type "crocodile" 1 piece
  • Adapter cable RJ11 1pc
  • Adapter cable RJ45 1pcs
  • The charger and its components 1 set.
  • Instruction manual 1 pc
  • Case 1 pcs
  • Packing box 1 pc
Dimensions (length , width , height ), mm
270  x   200  x   90